Installation Guides & Manuals – Expert Instructions for a Flawless Finish

Proper installation is key to maximizing the performance, longevity, and appearance of your Armolan USA window films. Whether you’re a professional installer or a DIY enthusiast, our comprehensive guides will help you achieve a smooth, bubble-free application with optimal durability.

Why Proper Installation Matters

Ensures maximum heat rejection and UV protection
Prevents bubbles, peeling, and uneven application
Enhances durability and long-term performance
Reduces the risk of incorrect adhesion and film damage

By following the right installation techniques, you ensure that your window film looks great and performs as intended.

Step-by-Step Installation Guide

🔹 Tools You’ll Need:

🛠️ Window film of choice
🛠️ Spray bottle with a soap & water solution
🛠️ Squeegee or rubber applicator
🛠️ Precision cutting knife or razor blade
🛠️ Lint-free microfiber cloth
🛠️ Hard card or plastic scraper

🔹 Preparation:

Clean the glass surface thoroughly using a glass cleaner or mild soap solution. Remove any dust, debris, or streaks.
Measure and cut the film slightly larger than the window dimensions.
Spray the window with the soap & water solution to create a smooth application surface.

🔹 Application:

Peel off the backing liner from the film and spray the adhesive side with the soap solution.
Apply the film to the glass, starting from the top and gently pressing it down.
Use the squeegee to remove excess water and air bubbles, working from the center outward.
Trim any excess film around the edges with a precision knife.
Dry the edges and let the film cure for at least 48 hours before rolling down car windows or cleaning.

Common Installation Mistakes & How to Avoid Them

❌ Bubbles & Wrinkles? → Use a squeegee in smooth, even strokes to push out trapped air.
❌ Edges peeling? → Ensure the glass was properly cleaned and allow sufficient curing time.
❌ Film not sticking? → Spray more solution before positioning the film and check for dust particles.